★★★★★4.9300+ Google reviews · rated 4.9 out of 5 by our customersRead our reviews →
Skip to main content

Shutter failure affecting security or access?

Emergency repair line: 07931 104160
Engineer operating the control switch of a stainless steel roller shutter over a commercial kitchen serving hatch

Fire Shutter Servicing: UK Legal Duties, Testing and What a Service Includes

A fire shutter can sit open, untouched, for years, and is then expected to close reliably at the one moment it really matters. That is why fire shutter servicing is not optional paperwork. In England and Wales, the law requires the person responsible for a building’s fire safety to keep fire safety equipment and devices maintained in efficient working order and good repair, and Scotland and Northern Ireland have similar duties. This guide explains who is responsible, how often a fire shutter should be serviced, what a proper service involves, what you can check yourself between visits and what to do if a shutter fails.

We are Sunrise Shopfronts & Shutters, based in West Bromwich with our own West Midlands workshop and over 15 years of work on commercial shutters. We survey, specify, manufacture and install fire shutters for suitable commercial openings, and we can review maintenance and support for an installed fire shutter once we have the product and site details.

Cream double fire doors with a wall-mounted fire extinguisher in a commercial corridor
Fire doors, fire shutters and extinguishers all belong to the fire safety measures the responsible person must keep in working order.

Key takeaways

  • The responsible person (usually the employer, owner, landlord or whoever controls the premises) must keep fire safety devices, including fire shutters, maintained in efficient working order and good repair.
  • Service frequency comes from the manufacturer’s instructions and your fire risk assessment. Many manufacturers recommend at least one service a year, and busy or harsh sites may need more.
  • A real service tests that the shutter closes as designed, including any link to the fire alarm, not just that it opens and closes on the switch.
  • Between services, keep the closing zone clear, never prop or wedge the shutter, and report damage straight away.
  • Keep every record. Service reports, defects and repairs show that the duty is being met.

What a fire shutter does

A fire shutter is a roller shutter designed and tested to resist the passage of fire for a set period when closed. It is used where an opening has to stay open for everyday work, such as a kitchen servery, a counter, a conveyor opening or a doorway in a warehouse compartment wall, but must close to protect the rest of the building in a fire.

Fire shutters are part of a building’s compartmentation: dividing a building into fire-resisting sections so that a fire is held where it starts for long enough for people to escape and for firefighters to work. The shutter’s fire resistance is proven by testing to standards such as BS 476 or BS EN 1634-1, and the shutter has to be installed in a suitable wall and opening for that performance to apply. Building regulations guidance in England, Approved Document B, sets out how openings in compartment walls should be protected.

The critical point is that a fire shutter only protects the building if it closes when it should. Unlike a fire door that is closed every day, a fire shutter is normally open, so a fault can stay hidden until a test or a real fire. Our earlier article, fire shutters in the West Midlands: where they matter most, explains where they are used and why.

Black and white photograph of a factory interior with a large roller shutter raised over an opening
Large openings in industrial buildings may need protecting where they pass through a compartment wall.

What the law requires

England and Wales: the Regulatory Reform (Fire Safety) Order 2005

The Fire Safety Order applies to almost all non-domestic premises in England and Wales, including workplaces, shops, warehouses and the common parts of blocks of flats. Article 17 of the Order requires the responsible person, where necessary to protect relevant persons, to ensure that the premises and the facilities, equipment and devices provided are “subject to a suitable system of maintenance and are maintained in an efficient state, in efficient working order and in good repair”. A fire shutter that forms part of the building’s fire protection falls within that duty.

The responsible person must also carry out and regularly review a fire risk assessment. Government guidance on fire risk assessments says you must keep a written record of your fire risk assessment. If the building relies on a fire shutter, the assessment should identify it and the maintenance it needs.

Scotland and Northern Ireland

In Scotland, duties come from the Fire (Scotland) Act 2005 and related regulations. In Northern Ireland, the Fire Safety Regulations (Northern Ireland) 2010 apply. The wording differs, but both expect fire safety measures to be maintained. If your premises are outside England and Wales, check the guidance that applies there.

Nation Main law Key duty for fire shutters
England and Wales Regulatory Reform (Fire Safety) Order 2005 Responsible person keeps fire safety devices maintained in efficient working order and good repair (Article 17)
Scotland Fire (Scotland) Act 2005 and related regulations Duty holders maintain fire safety measures
Northern Ireland Fire Safety Regulations (Northern Ireland) 2010 Appropriate persons maintain fire safety measures

This article is general guidance, not legal advice. Your fire risk assessor, fire engineer and the shutter manufacturer’s instructions should guide decisions for your building.

Who is responsible

Diagram showing who is responsible for keeping a fire shutter working: the responsible person, their duties to assess, maintain and co-operate, appointing a competent engineer, keeping records, and day-to-day duties for staff, with the main law in England and Wales, Scotland and Northern Ireland
The responsible person carries the duty, but everyone in the building plays a part.

Article 3 of the Fire Safety Order defines the responsible person. In a workplace, it is the employer, if the workplace is under their control. Otherwise it is the person who has control of the premises, or the owner. Government guidance lists the employer, the owner, the landlord, an occupier, or anyone else with control of the premises, such as a facilities manager, building manager or managing agent.

In multi-occupied buildings there can be several responsible persons, and they must co-operate. A typical example is a fire shutter that separates a ground-floor takeaway from the common stair of flats above. The tenant, the landlord and the managing agent all need to be clear about who arranges servicing, who keeps the records and who pays. If nobody owns the task, the shutter tends to be forgotten. It is worth writing down who does what, ideally in the lease or a maintenance agreement.

White double fire exit doors set in a red-painted wall
Fire exits, fire doors and fire shutters all need to work together as part of the building’s fire strategy.

How often a fire shutter should be serviced

There is no single legal interval written into the Fire Safety Order. Instead, the frequency comes from three sources:

  1. The manufacturer’s instructions. Many manufacturers recommend that fire shutters are serviced and tested by a competent person at least once a year, and some recommend more frequent checks.
  2. Your fire risk assessment. The assessor may recommend a specific interval or additional checks based on the risk.
  3. How the shutter is used and where it is. A shutter on a busy kitchen servery that is opened and closed every day, or one in a dusty, damp or greasy environment, will usually need more attention than one in a clean, quiet corridor.
Factor Why it matters Effect on service frequency
Manufacturer’s instructions Set the minimum maintenance for the product and its approvals Follow as a minimum
Fire risk assessment findings May identify the shutter as critical to escape or compartmentation Can require more frequent checks
Daily use Shutters used every day wear faster, especially motors, guides and bottom rails Often more frequent
Environment Grease, dust, damp and heat affect closing mechanisms and controls Often more frequent
Impact risk Forklifts, trolleys and deliveries can distort guides and curtains More frequent visual checks
Previous faults Repeat faults suggest underlying wear Shorter intervals until resolved

If you do not know when your shutter was last serviced, treat it as overdue. Book an inspection and test, and set a schedule from there.

Fire shutter due a check, damaged or behaving oddly?

Send us the make, model and location of the shutter and any previous service records, and we will review what it needs and the support we can provide.

Call 07931 104162 Send the details

What a fire shutter service involves

Eight areas a fire shutter service typically checks: records and identity; curtain, guides and bottom rail; barrel and drive; controls and power; closing on demand; alarm and detection link; the closing zone; and the report and record
The exact scope depends on the product, but these are the areas a competent engineer usually covers.

A proper fire shutter service is more than opening and closing the shutter on its switch. It should show that the shutter will close as designed when the fire alarm or detection system tells it to, or when power is lost if that is how it is designed to work. The detail depends on the product and the manufacturer’s instructions, but a service typically includes:

Identification and records

The engineer identifies the shutter, ideally from its label or plate, and reviews previous service reports. Changes since the last visit matter: building work around the opening, new services run through the wall above, a changed alarm system, or new stock racking nearby can all affect the shutter.

Curtain, guides and bottom rail

The curtain is checked for damage, distortion and missing components, and the guides for alignment, secure fixing and impact damage. The bottom rail must be able to come down fully to the floor or sill. Any seals or intumescent materials fitted as part of the product are checked for condition.

Barrel, springs and drive

The barrel, bearings, end plates, springs, motor, gearbox and brake are inspected for wear, noise and correct adjustment. A worn or poorly adjusted drive can stop a shutter closing fully or make it close too fast.

Close-up of a roller shutter barrel with an electric motor mounted above a steel curtain
The barrel and drive are inspected for wear, noise and correct adjustment.

Controls, power and back-up

Control panels, indicators, switches, wiring and isolation are checked. Where the shutter relies on battery back-up to close if the mains fails, the batteries and charging are checked, because batteries deteriorate with age.

Closing on demand

This is the heart of the service. The shutter is tested to show it closes as the design intends, at a controlled speed, all the way down. Depending on the design, this may involve simulating a fire alarm signal, a detector, a power failure or the release of a fusible link.

Alarm and detection link

Where the shutter is linked to the fire alarm, the test should show that an alarm signal actually triggers closure. This often needs coordination with whoever maintains the fire alarm, so plan the visit together where you can.

The closing zone and signage

The area beneath and around the shutter must be kept clear so nothing stops it closing. The engineer checks for stock, bins, furniture or equipment in the way, and for any props, wedges or bypassed controls. Signs should warn people not to obstruct the shutter.

Report and record

You should receive a written report listing what was checked and tested, the results, any defects found and the action recommended, with the date and the engineer’s details. Keep it with your fire safety records.

Engineer on a step ladder checking a wall-mounted control box beside a closed dark grey roller shutter in an industrial unit
Controls and power supplies are checked as part of a service, alongside the shutter itself.

How fire shutters close, and why it matters for testing

Fire shutters close in different ways, and the testing has to match the design. Common arrangements include:

How it closes How it typically works What the test needs to show
Alarm-linked Closes when the fire alarm or a local detector sends a signal An alarm signal really does trigger closure
Fail-safe on power loss Closes when power is removed, using gravity, springs or a governed descent The shutter closes safely and fully without mains power
Battery back-up A back-up supply powers closing if the mains fails The batteries hold enough charge to close the shutter
Fusible link A heat-sensitive link releases the shutter at a set temperature The release mechanism is free and correctly set

Many shutters combine more than one of these. Check what your shutter is designed to do, and make sure the service tests it. A shutter that has only been opened and closed on its normal switch has not been tested as a fire shutter.

Common faults found at a service

What you might notice Possible cause Why it matters
Shutter stops short of the floor Obstruction, damaged bottom rail or guides, worn drive A gap at the bottom defeats the purpose of the shutter
Slams down or closes very fast Worn or poorly adjusted governor, brake or springs Risk to people underneath and damage to the shutter
Does not close on alarm test Fault in the alarm interface, controls or release The shutter would not close in a real fire
Panel shows a fault or battery warning Ageing batteries, wiring or control faults Back-up closing may not work in a power cut
Scraping, grinding or new noises Impact damage, misalignment, wear Can lead to the shutter jamming
Dented curtain or bent guides Impact from vehicles, trolleys or stock May stop it closing or affect fire performance
Shutter propped or switched off People trying to stop it closing during work The shutter cannot do its job

Many of these faults are similar to those on ordinary shutters; our guides to why a roller shutter won’t close and signs a shutter motor needs upgrading explain the mechanics. On a fire shutter, though, any repair must keep the product working as designed, so use parts and methods the manufacturer approves. Our upcoming guide to roller shutter parts explains what each component does.

Engineer in hi-vis kneeling to work at the base of a shutter guide
The bottom rail and guides take the most knocks and must let the shutter close fully.

★★★★★

“We’re really happy with the service from Sunrise Shopfronts! They always do a fantastic job and fixed our shutter very quickly. Their service is reliable, efficient, and professional. We really appreciate their quick response and excellent workmanship. Highly recommend Sunrise Shopfronts to anyone looking for a reliable and trustworthy service!”

Paramjot Dhaliwal, Google review

What you can check between services

The responsible person and staff can carry out simple visual checks between professional services. They do not replace a service, but they catch problems early. Typical checks are:

  • ☐ The closing zone is clear: no stock, bins, chairs or equipment under or near the shutter
  • ☐ Nothing is propped or wedged, and no controls have been switched off or bypassed
  • ☐ No visible damage to the curtain, guides or bottom rail
  • ☐ The control panel shows no fault or battery warnings
  • ☐ Warning signs are in place and readable
  • ☐ Any changes near the opening have been reported to the responsible person

Our simple monthly shutter maintenance checklist can be adapted for this. Do not carry out drop tests or adjust springs or brakes yourself; testing a fire shutter’s closing should be done by a competent person following the manufacturer’s procedure. Our upcoming roller shutter servicing guide covers servicing for ordinary shutters.

Modern warehouse exterior with several roller shutter doors
Warehouses may combine everyday loading shutters with fire shutters inside, and each needs the right maintenance.

Keeping records

Good records show that the duty to maintain is being met, help engineers spot repeat faults, and are often the first thing an enforcing authority or insurer will ask for. Keep, for each fire shutter:

  • its location, product and any reference on the label;
  • installation and handover information, including the manufacturer’s instructions;
  • every service report, with the date, results and engineer;
  • defects found and when and how they were fixed;
  • the results of retesting after any repair;
  • notes of any changes to the alarm system or the opening.

Store them with your fire risk assessment and other fire safety records, and make sure the people who need them can find them, including after a change of tenant or managing agent.

Engineer in hi-vis using a tablet beside a shutter
Written service reports are a key part of showing the shutter is being maintained.

Common mistakes that leave fire shutters unmaintained

  1. Assuming someone else has it covered. In shared buildings, the tenant may think the landlord services the shutter and the landlord may think the tenant does.
  2. Servicing the shutter but not testing the alarm link. The shutter works on its switch but never closes on a real alarm signal.
  3. Losing the paperwork. Reports go with a previous manager or tenant, and nobody knows when the shutter was last tested.
  4. Living with a known fault. A shutter switched off “temporarily” because it kept dropping during service hours can stay off for months.
  5. Forgetting the shutter after building work. New ceilings, ducts, racking or alarm changes near the opening can stop the shutter working as designed.

If a fire shutter is damaged or fails

Six steps to take if a fire shutter is damaged or fails a test: keep people safe, tell the responsible person, record the fault, call a competent engineer, repair and retest, update the records; and never prop it open, wedge it, disconnect it from the alarm or store goods under it
A failed fire shutter leaves a gap in the building’s protection, so act quickly and keep a record.

A fire shutter that cannot close as designed leaves a gap in the building’s fire protection. The responsible person should decide on interim measures, guided by the fire risk assessment or the fire risk assessor, while a repair is arranged. Never be tempted to prop the shutter open, wedge the curtain, disconnect it from the alarm or store goods under it to keep the opening usable. That only hides the problem.

If the shutter is stuck, has dropped onto something or someone, or is hanging unevenly, keep people clear and do not try to force it. For urgent shutter problems, our emergency shutter repair line is answered 24/7, 365 days a year. Tell us the shutter is a fire shutter, and give the make, model and location if you can, so we can review what it needs and the support we can provide.

Shutter stuck, damaged or leaving you insecure?

Our emergency line is answered 24 hours a day, 365 days a year, and we usually have an engineer with you within 2 hours to make the opening safe and plan the right repair.

Call 07931 104160 (24/7) About emergency repairs

★★★★★

“It’s rare to find a company that offers this level of service, especially at a weekend. Communication was clear, the work was top quality, and I felt looked after from the first phone call to the end of the visit. I wouldn’t hesitate to recommend them to anyone needing shutter repairs, and they’ll be my first call if I ever need help again. Thank you to Joe and the whole team!”

Kam Kang, Google review

Choosing who services your fire shutter

Fire shutters should be serviced by a competent person: someone with the training, knowledge and experience to inspect, test and repair that type of shutter, following the manufacturer’s instructions. When choosing a service provider, ask:

  • What experience do you have with this type and make of fire shutter?
  • Will you test closing on alarm signal and on power loss, as the design requires?
  • Will you coordinate with our fire alarm engineer where needed?
  • Will repairs use parts and methods approved for the product?
  • What will the written report include?
  • Do you hold any third-party certification for fire shutter work?

Our maintenance and repairs service covers planned maintenance for commercial shutters, and our roller shutter repairs team handles faults. For a fire shutter, contact us with the product and site details so the maintenance requirements and the appropriate support can be reviewed before a visit. For wider safety duties on powered shutters, see our guide to roller shutter safety regulations.

Grey steel personnel door set in a clad commercial building wall
Commercial buildings combine many doors and openings; the fire risk assessment should identify which ones are part of the fire strategy.

Where fire shutters are found

Commercial kitchens and serveries

Fire shutters are used over serveries and hatches between kitchens and dining or public areas. Grease and heat mean these shutters often need more frequent cleaning and checking, and the closing zone is easily obstructed by trays and equipment.

Warehouses and industrial buildings

Larger fire shutters protect openings in compartment walls, conveyor openings and loading areas. Impact from forklifts and pallets is a common cause of damage. See our industrial roller shutters page and our upcoming guide to warehouse roller shutter doors.

Mixed-use buildings

Shops and takeaways with flats above may use fire shutters to separate the commercial unit from shared escape routes. These are often the shutters where responsibility is least clear, so agree it in writing.

Counters and reception areas

Counter shutters in schools, offices and public buildings can be fire-rated where they form part of a fire-resisting wall. They are opened every day, so wear is a factor.

Pale blue double steel doors on a commercial building
Steel doorsets, shutters and other closures each have their own maintenance needs.

Fire shutters, fire curtains and fire doors

Fire curtains are fabric barriers that drop from a box above an opening, and are designed and tested to their own standards, including BS 8524. Fire doors are hinged or sliding doorsets. Each has its own maintenance requirements, so a service provider for one is not automatically right for the others. Check what the manufacturer specifies for each product.

Preparing for a service visit

A little preparation makes the visit quicker and the test more meaningful:

  • ☐ Location and access: where each shutter is and how the engineer reaches the barrel and controls
  • ☐ Product details: photos of the label, the make and model if known
  • ☐ Previous reports and any outstanding defects
  • ☐ Alarm coordination: agree with your alarm engineer how a closure on alarm will be tested
  • ☐ Clear the area under and around the shutter
  • ☐ Warn staff and occupants that the shutter, and possibly the alarm, will be tested

We work across Birmingham and the West Midlands, with priority response in that area, and across the UK; see the areas we cover. To talk about a fire shutter, send us the details.

Frequently asked questions

Is fire shutter servicing a legal requirement?

In England and Wales, the Fire Safety Order requires the responsible person to keep fire safety equipment and devices maintained in efficient working order and good repair. Regular servicing by a competent person is how most responsible persons meet that duty for fire shutters. Scotland and Northern Ireland have similar duties.

How often should a fire shutter be serviced?

Follow the manufacturer’s instructions and your fire risk assessment. Many manufacturers recommend at least once a year, and shutters in busy or harsh environments may need more frequent checks.

Who pays for fire shutter servicing in a rented building?

It depends on the lease and who has control of the premises. The tenant, landlord and managing agent should agree who arranges and pays for servicing, and write it down.

Can I test a fire shutter myself?

You can carry out visual checks and keep the closing zone clear. Testing the closing mechanism, adjusting springs or brakes, and testing the alarm link should be done by a competent person.

What happens if a fire shutter fails its service?

The engineer should record the defect and recommend action. The responsible person should arrange the repair promptly, decide on interim measures guided by the fire risk assessment, and make sure the shutter is retested afterwards.

Can any shutter engineer service a fire shutter?

The engineer should be competent for that type of fire shutter and follow the manufacturer’s instructions, using approved parts for repairs.

Does a fire shutter need to be linked to the fire alarm?

That depends on the building’s fire strategy and the shutter’s design. Many are, so that they close when the alarm sounds. If yours is linked, the link should be tested at the service.

Can Sunrise service my fire shutter?

Contact us with the product and site details. We will review the maintenance requirements and the support we can provide.

Need a shutter looked at?

Tell us what the shutter is doing and, if you can, send a photo. We will explain the likely next step before any work starts, and we will always tell you plainly whether repair or replacement makes more sense.

Send us the details

Call the team 07931 104162 24/7 emergency 07931 104160